How do I replace my Notion sensor battery?

The batteries inside of your sensors should last close to a year. When it comes time to replace them, you can do so by following these steps.

  1. Grip the outer housing of your Notion sensor.
  2. Turn counter-clockwise (like you're twisting off a bottle cap.)
  3. Carefully lift the battery out of the battery holder. You can either grip it with two fingers and lift it out or use a small screwdriver and lever it out using the gap on one side of the battery holder.
  4. The battery can be replaced with a CR2477N coin cell. Press it into place with the smaller diameter side facing down.
  5. Once the battery is firmly in place, twist the sensor cover over the top of it. It should twist on in a clockwise rotation (like your resealing a bottle cap onto a bottle). 

 

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL DISPOSAL REGULATIONS FOR LITHIUM BATTERIES 

Have more questions? Submit a request

0 Comments

Article is closed for comments.